Welded Mesh Fence
3D welded wire mesh fence is a pre-welded steel panel fence with V-bend profiles. Buyers use it for homes, schools, parks, factories and commercial boundaries when they need clean appearance, practical rigidity, cost control and matched posts or gates.
Set panel height and V-bend count first, then match wire, mesh, posts, clamps, gates and finish as one fence system.
3D welded wire mesh fence, also called V-mesh fence, is a rigid welded panel system with V-shaped reinforcement curves that improve panel stiffness without adding unnecessary panel weight.
For quotation comparison: Compare the same 3D panel with equal wire, opening, height, width, V-bends, posts, fixings, gates, finish and packing.
Specifications
Common 3D welded wire mesh panels use 3.0/4.0 mm or 4.0/5.0 mm wire, 50 × 200 mm mesh openings, 630–2500 mm heights, 2–4 V-bends and galvanized plus powder-coated finishes.
| Buying Specification | Metric Selection Reference | Imperial / Project Reference |
|---|---|---|
| Wire Diameter (Raw/Coated) | 3.0 mm / 4.0 mm, 4.0 mm / 5.0 mm (±0.05 mm) | If specifying gauge, state the gauge system and nominal metric diameter |
| Mesh Opening Size | 50 mm × 200 mm, 50 mm × 100 mm, 75 mm × 150 mm | 2" x 8", 2" x 4", 3" x 6" |
| Panel Height | 630 mm to 2500 mm | 2.0 ft to 8.2 ft |
| Panel Width | 2000 mm / 2500 mm / 3000 mm | 6.5 ft / 8.2 ft / 9.8 ft |
| Number of V-Curves | 2, 3, or 4 depending on panel height | 2, 3, or 4 curves |
| Surface Treatment | Hot-dip galvanized + polyester powder coating | PVC coating option |
| Post Profiles | Peach posts, square posts, round posts | Profile, centre spacing and fixing to match the approved layout |
| Zinc Coating Reference | Up to 275 g/m² zinc weight | Coating level and inspection requirement confirmed for the order |
Reference basis: ASTM F2453/F2453M — welded wire mesh fence fabric
Confirm in the RFQ: Panel width and height, wire, mesh, bend geometry, post, fixing, coating and tolerance.
These BP photos show related product or handling examples. Define the checks and dated records required for your order in the quotation.
Confirm panel height, width, mesh opening, wire diameter and the required number and position of V-bends against the approved specification.
Define the weld, galvanized substrate, powder-coating system, color and any order-specific inspection requirement before production.
Match peach, square or round posts with clamp spacing, caps, corners and gate hardware shown in the approved layout.
Agree pallet size, panel buffers, strapping, wrapping, accessory labels and unloading limits for the destination.
Packing and RFQ
Metal pallets or wooden pallets with cardboard buffers, steel strapping and waterproof film.
Project quotation
Send the required specification, quantity and destination. We will review the complete system and packing before quotation.
