Quarry Screen Mesh
Vibrating screen mesh is selected by aperture, wire diameter, panel size, crimp type, edge hook and wet or dry screening conditions. The screen deck and tensioning method must be confirmed before production.
Product overview
Aperture, wire, crimp and edge must fit the machine, processed material and wet or dry duty.
Vibrating screen mesh is selected for particle sizing by the processed material, opening, wire, crimp, deck support and tensioning arrangement.
For quotation comparison: Do not select by nominal aperture alone; wire, crimp, hook, tension and duty conditions change performance.
Specifications
A comparable screen quotation must match material, aperture, wire, crimp, panel dimensions, hook geometry, tension direction, support spacing and service duty.
| Specification item | Selection reference | Confirm in RFQ / approved drawing |
|---|---|---|
| Processed material | Particle shape, moisture, abrasiveness and required cut influence the screen | Material, feed condition, target cut and operating duty |
| Material / grade | High-carbon, spring-steel or stainless routes depend on wear and corrosion duty | Exact grade or buyer-approved equivalent and document requirement |
| Aperture | Square or rectangular opening selected for sizing and flow direction | Nominal opening, orientation, tolerance and test method |
| Wire and crimp | Wire diameter and crimp affect open area, rigidity and wear life | Nominal wire, crimp construction and tolerance |
| Panel dimensions | Width and length must match the usable deck area and support layout | Finished width, length, flow direction and support-bar spacing |
| Hook / edge | Hook form, fold, liner and orientation must match the tensioning system | Hook drawing or verified sample, side and bend direction |
| Tension and support | Incorrect tension or unsupported spans can shorten service life | Tensioning method, clamp arrangement and support condition |
| Inspection and packing | Opening, wire, dimensions and hook geometry should be checked before protected packing | Sampling, records, labels, flat or approved rolled packing |
Reference basis: ISO 14315 — industrial wire screens, technical requirements and testing · ISO 4783-3 — aperture/wire combinations for pre-crimped or pressure-welded screens
Confirm in the RFQ: Aperture, wire, material/grade, crimp style, panel dimensions, hook type/direction, support spacing, tensioning, tolerance and wear requirement.
System and options
Packing and RFQ
Panels are kept flat or rolled only when suitable, with hooked edges and screen surfaces protected from deformation.
Project quotation
Send the required specification, quantity and destination. We will review the complete system and packing before quotation.