Wire Mesh Roll
Welded wire mesh is specified by opening, wire diameter, roll width, roll length, material and coating. Smaller openings suit cages and guards, while heavier wire and larger openings suit fencing and fabrication.
Product overview
Select welded wire mesh by end use, wire, opening and supplied format; it should not inherit woven filtration-mesh guidance.
Welded wire mesh is produced by resistance-welding longitudinal and cross wires at each intersection, then supplying the mesh in rolls or flat sheets.
For quotation comparison: Compare quotations only when wire, opening, format, dimensions, material, coating, edge, tolerance and packing use the same scope.
Specifications
Common openings range from 6.35 × 6.35 mm to 100 × 100 mm with 0.5–4.0 mm wire, 0.5–2.0 m roll widths and galvanized, PVC-coated or stainless options.
| Buying specification | Common options | State in RFQ / drawing |
|---|---|---|
| Supply format | Rolls, flat sheets or fabricated pieces selected for processing and handling | Format, finished width/length and piece count |
| Wire | Wire selected by aperture, fabrication and end use | Material, nominal diameter and tolerance |
| Opening | Square or rectangular welded spacing | Center-to-center or clear opening and tolerance |
| Material and finish | Plain, galvanized, stainless or coated construction by application | Base material, coating/finish and test requirement |
| Edges and overhang | Flush, trimmed or projecting wire edges by fabrication need | Edge condition and overhang length |
| Fabrication | Cut-outs, bends, frames or welded attachments quoted from drawing | Drawing revision, dimensions and weld requirement |
| Packing and identification | Rolls/sheets protected and labelled by size and batch | Core/pallet, bundle count, labels and destination |
Reference basis: ASTM F2453/F2453M or ASTM F2919/F2919M — welded fence mesh, when the end use is fencing · Buyer application drawing for cages, guards, partitions or other uses
Confirm in the RFQ: End use, wire, opening pattern, roll/panel size, weld strength or test requirement, edge condition, coating, tolerance and packing.
System and options
Packing and RFQ
Rolls are wrapped with moisture protection and palletized when required; sheets are bundled flat.
Project quotation
Send the required specification, quantity and destination. We will review the complete system and packing before quotation.